Driver: The PSW10 uses a 10" Dynamic Balance polymer composite cone driver for deep, smooth response and low distortion. For longer excursion, the woofer uses a hi-roll foam surround.
Amplifier: The subwoofer is powered by a high-current amplifier producing 50 watts RMS/100 watts dynamic power.
Enclosure: The PSW10 features non-resonant MDF construction with 3/4" baffle and internal bracing for deep bass impact with superior detail and accuracy.
3-Way Power Switch: The subwoofer has a 3-way power switch on the rear panel. You can select Auto, which turns the unit on automatically when an input signal is received and off a few minutes after the signal stops; On, which keeps the unit on until it is switched off, and Off, which turns the unit completely off (instead of placing it in a standby mode). The LED power indicator glows green when the unit is on and red when the unit is off.
Volume Control: The PSW10 has a rotary volume control to adjust the volume of the subwoofer relative to the other speakers in the system.
Phase Switch: The subwoofer's phase switch allows you to select normal or reverse. If the bass sounds muddy or unclear, toggling the phase control can sometimes strengthen the bass attack.
Low-Pass Filter: The PSW10 offers a continuously variable low-pass filter, adjustable from 80-160 Hz. Note: The manual incorrectly lists the frequency range as 80-200Hz.
Inputs and Outputs Notes
Line Inputs: The subwoofer has gold plated left and right RCA Line Level inputs. These inputs are for use with electronics featuring stereo pre-amp line outputs or an LFE subwoofer output. If your receiver or processor only has a single subwoofer line output, either the left or right input jack can be used.
Note: If the filtered Low Frequency Effects (LFE) output of an A/V receiver or processor is connected to the PSW10's line inputs, low frequency signals will be filtered by the A/V receiver/processor and the PSW10. When this happens the PSW10's low-pass filter setting should be as high as possible (160Hz) to minimize the interaction between the filters.
Speaker Level Input/Output: The subwoofer has spring clips for the speaker level input and output. The subwoofer's low-pass filter takes the low frequencies (based on the setting of the filter) and passes a full-range signal out to the speakers. This is the recommended method of connecting the subwoofer with a Polk Audio RM-series Home Theater speaker package and other satellite speaker systems.
Frequency Response: The overall frequency response for the subwoofer is 35-200 Hz, and the -3 dB frequency response is 40-160 Hz.
Amplifier: The warranty on the amplifier is 3 years parts and labor.
Driver: The warranty on the driver is 5 years parts and labor.
Features & specs
Enclosure Bass Reflex
Video Shielded No
Woofer Size (inches) 10
Woofer Composition Polymer Composite
Firing Direction Front
Preamp-Level Inputs Yes
Speaker-Level Inputs Yes
Speaker-Level Outputs Yes
Low-Pass Crossover Freq 80-160 Hz
High-Pass Crossover Freq None
Phase Switch Yes
Amplifier Output (watts) 50
Frequency Response 40-160 Hz
Height (inches) 14-3/8
Width (inches) 14
Depth (inches) 16-3/16
Speaker Parts Warranty 5 Yrs woofer/3 Yrs amp
Speaker Labor Warranty 5 Yrs woofer/3 Yrs amp
Amplifier Parts Warranty ---
Amplifier Labor Warranty ---
The Polk Audio PSW10 replaces these items:
Polk Audio PSW202
There are no reviews for this product.