( 01 / 01 )Audio-TechnicaAT-LP120XBT-USBDirect-Drive
Audio-Technica AT-LP120XBT-USB is a fully manual, direct-drive DJ-style turntable with Bluetooth wireless output, USB digitising, and a switchable phono/line preamp. It ships with an AT-HS6 headshell and AT-VM95E VM cartridge.
Key Features
- 3-speed fully manual direct drive: 33-1/3, 45 and 78 RPM
- Bluetooth 5.0 with Qualcomm aptX and SBC codecs (A2DP)
- USB output for computer recording (16-bit, 44.1 or 48 kHz selectable)
- Switchable PHONO / LINE (MM) RCA outputs with built-in RIAA phono preamp
- Die-cast aluminium platter; DC servo motor; electronic brake
- Static-balanced S-shaped tonearm with adjustable anti-skate and tracking force
- Includes AT-HS6 headshell with AT-VM95E elliptical VM cartridge
Overview
The AT-LP120XBT-USB combines classic direct-drive platter control with modern wireless and USB connectivity. Pair Bluetooth headphones or speakers, connect RCA PHONO or LINE to an amplifier, or capture vinyl to a computer over USB. Pitch control, a quartz-lock detent, and a stylus target light support precise playback.
Specifications
Figures below are from the official Audio-Technica AT-LP120XBT-USB User Manual (EN), Specifications section.
Turntable
Source: Audio-Technica AT-LP120XBT-USB User Manual, Specifications - Turntable specifications.
| Type | 3-speed, fully manual operation |
|---|---|
| Motor | DC servo motor |
| Drive method | Direct drive |
| Speeds | 33-1/3 RPM, 45 RPM, 78 RPM |
| Turntable platter | Die-cast aluminum |
| Starting torque | > 1.0 kgf·cm |
| Braking system | Electronic brake |
| Wow and flutter | < 0.2% WRMS (33 RPM) at 3 kHz |
| Signal-to-noise ratio | > 50 dB |
| Output level (PHONO) | 4 mV nominal at 1 kHz, 5 cm/sec |
| Output level (LINE MM) | 240 mV nominal at 1 kHz, 5 cm/sec |
| Phono pre-amp gain | 36 dB nominal, RIAA equalized |
Tonearm
Source: same User Manual, Tonearm specifications.
| Type | Static balanced S-shaped tonearm |
|---|---|
| Effective length | 230.5 mm |
| Overhang | 16 mm |
| Maximum tracking error angle | Less than 3° |
| Stylus pressure adjustment range | 0 to 4 g |
| Applicable cartridge weight range | 3.5 to 8.5 g |
Cartridge and headshell (included)
Source: same User Manual, Cartridge and headshell specifications.
| Cartridge model | AT-VM95E |
|---|---|
| Cartridge type | VM |
| Recommended load impedance | 47,000 ohms |
| Output voltage | 4.0 mV (1 kHz, 5 cm/sec) |
| Stylus | 0.3 × 0.7 mil bonded elliptical stylus |
| Cantilever | Aluminum pipe |
| Tracking force range | 1.8 to 2.2 g (2.0 g standard) |
| Cartridge weight | 6.1 g |
| Headshell model | AT-HS6 |
| Headshell weight | 9 g (including lead wire) |
| Headshell overhang adjustment | ± 5 mm |
Bluetooth and USB
Source: same User Manual, Communication specifications and USB function.
| Bluetooth version | 5.0 |
|---|---|
| Maximum RF output | 10 mW EIRP |
| Maximum communication range | Line of sight - approx. 10 m (33') |
| Frequency band | 2.402 GHz to 2.480 GHz |
| Modulation method | FHSS |
| Compatible Bluetooth profiles | A2DP |
| Supported codecs | Qualcomm aptX audio, SBC |
| USB A/D, D/A | 16 bit 44.1 kHz or 48 kHz USB selectable |
| Computer interface | USB 1.1 compliant; Windows 8 or above, or Mac OS X or above |
General
Source: same User Manual, General specifications.
| Power supply requirements | 100 to 240 V, 50/60 Hz, 1.5 A Max. |
|---|---|
| Power consumption | 3.2 W |
| AC adapter | 12 V, 3 A |
| Dimensions (W × D × H) | 452.0 × 352.0 × 141.6 mm |
| Weight | 8 kg (without dust cover) |
| Replacement stylus (sold separately) | AT-VMN95E |
| Replacement headshell (sold separately) | AT-HS6 |
Datasheets
Public manufacturer documents (link only - this does not add a downloads module):
