TurboSound iQ122500Watt 12inchPowered

Turbosound iQ12 is a 2,500 W powered two-way 12" loudspeaker with Klark Teknik DSP, Spatial Contour Control, speaker modelling presets, and ULTRANET digital networking (model code P0APL).

Key Features

• Maximum output power 2,500 W (Class-D); maximum SPL 130 dB peak
• Frequency response 52 Hz-18 kHz (±3 dB); 45 Hz-20 kHz (−10 dB)
• 12" (308.5 mm) LF driver + 1" (25.4 mm) HF compression driver; active crossover
• Nominal dispersion 80° H × 60° V @ −6 dB
• Klark Teknik DSP with LCD, SCC positioning EQ, feedback suppression (FBQ), delay 0-300 ms, 20 presets
• ULTRANET 16-channel digital network (RJ45); combo jack/XLR inputs; Neutrik powerCON mains in/link
• Injection-moulded polypropylene enclosure; dual-angle pole mount; M10 × 3 flying points

Overview

The iQ12 suits portable PA and installed applications where DSP speaker modelling and network audio are useful. Independent HF/LF limiters and Class-D amplification are specified for clarity at high output and long-term reliability.

Specifications

Figures below are from the official Turbosound iQ12 Product Information Document (Music Tribe / Turbosound technical specifications).

System and transducers

Source: Turbosound iQ12 Product Information Document - Technical Specifications / System.

Frequency response	52 Hz-18 kHz ±3 dB; 45 Hz-20 kHz −10 dB
Nominal dispersion	80° H × 60° V @ −6 dB points
Maximum SPL	130 dB peak
Crossover type	Active
Transducers	1× 12" (308.5 mm) LF driver; 1× 1" (25.4 mm) HF compression driver
Limiter	Independent HF, LF, peak and RMS

Amplifier and connectors

Source: same PID - Amplifier / Connectors / Controls.

Maximum output power	2,500 W (independent of limiters and driver protection circuits)
Amplifier type	Class-D
Protection	Short circuit, open circuit, thermal
Input A / B	2× combo jack/XLR
Sensitivity	Line +4 dBu, mic −22 dBu, switchable
Input impedance	20 kΩ unbalanced, 40 kΩ balanced
Maximum input level	+21 dBu
Output A / B	2× XLR linked to input
Mix output	XLR, balanced
Output impedance	100 Ω unbalanced, 200 Ω balanced
Ultranet input/link	2× RJ45
Mains supply connectors	Neutrik powerCON input 20 A and link 15 A

DSP and ULTRANET

Source: same PID - User DSP Functions / Ultranet Digital Network.

Factory EQ presets	Positioning, Sound mode, Sound modeling, FBQ
Display	LCD 128 × 32, blue backlit
Delay	0-300 ms
Equalisation	High and low shelving EQ; 2× parametric EQ
Limiter (DSP)	Zero attack input limiter
Presets	20 total presets, 19 user-definable
Crossover (DSP)	High Pass L-R 24 dB/oct
ULTRANET channels	16 channels
ULTRANET latency	< 0.9 ms
ULTRANET cabling	Shielded CAT5; max. 75 m recommended

Power supply and enclosure

Source: same PID - Power Supply / Enclosure. EU/UK voltage used for SA.

Power consumption	150 W @ 1/8 max power
Voltage (UK / Australia / Europe)	220-240 V~, 50/60 Hz (T 10 A H 250 V)
Dimensions (H × W × D)	609 × 370 × 370 mm
Net weight	21.1 kg
Construction	Injection-moulded polypropylene enclosure
Finish	Black painted
Grille	Powder coated perforated steel
Flying hardware	M10 × 3 points
Optional accessory	iQ12-WB steel wall bracket

Datasheets

Public manufacturer documents (link only - this does not add a downloads module):

• Turbosound iQ12 Product Information Document (PDF)
• Turbosound (Music Tribe) site