Why it belongs here

A confident final check before the cart.

The PhD EXC-4KP70 HDMI Extender delivers high-quality 4K60Hz 4:4:4 video and audio transmission over a single CAT cable, ideal for custom installations requiring reliable HDBaseT™ extension up to 70 metres. It supports HDR, HDCP 2.2, bi-directional IR, RS232 control, and Power over Cable (PoC) for flexible and efficient AV setups. Key Features HDBaseT™ distribution of HDMI 2.0b 4K60Hz 4:4:4 HDR video and audio over a single CAT5E/6/6A cable Colour Space Conversion (CSC) visually lossless compression technology Supports resolutions up to 4K2K@50/60Hz 4:4:4 and 1080P up to 70m HDR 10-bit pass-through for enhanced dynamic range Supports HDMI High Bit Rate (HBR) audio including Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and DTS:X Bi-directional IR and RS232 control support for remote device management Power over Cable (PoC) with included 24V/1A power supply to power transmitter or receiver HDCP 2.2 and HDCP 1.4 compliant for secure content transmission Low power consumption, less than 10W Specifications HDMI Compliance: HDMI 2.0b HDCP Compliance: HDCP 2.2 and HDCP 1.4 Video Bandwidth: 600 MHz (18 Gbps) HDBaseT Class: Class B Technology: Colour Space Compression (CSC) Supported Resolutions: Up to 4K2K@50/60Hz (YUV4:4:4), 4K2K@30Hz, 1080P@120Hz, 1080P 3D@60Hz Colour Space: RGB, YCbCr 4:4:4, YCbCr 4:2:2 Colour Depth: 10-bit, 12-bit Audio Formats (Pass-through): LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X ESD Protection: ±8kV (air-gap discharge), ±4kV (contact discharge) Connections: Transmitter Inputs: 1x HDMI Type A (19-pin female), 1x IR Input (3.5mm stereo mini-jack), 1x RS-232 (Phoenix jack) Transmitter Outputs: 1x HDBaseT Out (RJ45), 1x IR Output (3.5mm stereo mini-jack) Receiver Inputs: 1x HDBaseT In (RJ45), 1x IR Input (3.5mm stereo mini-jack), 1x RS-232 (Phoenix jack) Receiver Outputs: 1x HDMI Type A (19-pin female), 1x IR Input (3.5mm stereo mini-jack) What's in the Box EXC-4KP70-HDTL-RX Display Receiver 1 x EXC-4KP70-HDTL-RX HDBaseT™ Display Receiver 2 x Surface mounting brackets 1 x Phoenix terminal (male) 1 x ECO-IR-RX 5V IR (RX) receiver cable 1 x ECO-IR-TX 5V IR (TX) emitter/blaster cable 1 x User manual EXC-4KP70-HDTL-TX Transmitter 1 x EXC-4KP70-HDTL-TX Transmitter 2 x Surface mounting brackets 1 x Phoenix terminal (male) 1 x ECO-IR-RX 5V IR (RX) receiver cable 1 x ECO-IR-TX 5V IR (TX) emitter/blaster cable 1 x PHD-ADP0047 24V/1A power supply 1 x User manual Optional Accessories These optional accessories are not included and can be purchased separately: PHD-OPTOCABLE-E: Optically isolated IR control cable (3.5mm Mono to 3.5mm Stereo jack) for IR passthrough from third-party control solutions to PhD Solutions ECO extenders. Compatible with 12V IR third-party products. Note: Cable is directional - Mono end plugs into IR output of the control system; stereo end plugs into the IR input of the extender.